Will be marked in red in summary майнинг

Nbminer выделяет карты красным

MegaVlad

Бывалый

Я недавно отвечал в соседней теме

В NB_Miner красным цветом помечаются карты, в которых возникли ошибки во время верификации сгенерированного DAGa.
По идее это должно косвенно свидетельствовать о нестабильной работе карты, возможности её отвала или инкорректах.

[12:07:36] WARN — Device 3: DAG — Verification failed, invalid 2.0%.
[12:07:36] INFO — Device 3: DAG — Built, 12.43 s.
[12:07:36] WARN — Device 3: will be marked in red in summary.

kidennh

Пляшущий с бубном

Я недавно отвечал в соседней теме

В NB_Miner красным цветом помечаются карты, в которых возникли ошибки во время верификации сгенерированного DAGa.
По идее это должно косвенно свидетельствовать о нестабильной работе карты, возможности её отвала или инкорректах.

[12:07:36] WARN — Device 3: DAG — Verification failed, invalid 2.0%.
[12:07:36] INFO — Device 3: DAG — Built, 12.43 s.
[12:07:36] WARN — Device 3: will be marked in red in summary.

Stephan Dusan

Бывалый

просто на картах поверлимит стоит низкий. не меньше 100 должен быть. айсхеш любит до 150 повлима и ядра плюс 200

прирост производительности в мегахешах от 5 до 25% в зависимости от карты.
Картам надо прогреться, поэтому до 80 градусов на чипе можно смело держать. Потом можно включить кульки посильнее.
Первую неделю риг должен работать именно так.

Источник

Crazy-Mining.org

Главная » Майнинг » NBMiner v36.1 – GPU Crypto Miner (Download and Step-by-Step)

NBMiner v36.1 – GPU Crypto Miner (Download and Step-by-Step)

NBMiner – NVIDIA & AMD GPU Miner for ETH, RVN, GRIN, BEAM, CFX, AE, BTM, SERO, HNS, BFC. Support OS: Windows x64 & Linux.

v36.1

• optimize : octopus Lower power comsumption for 20、30 series Nvidia GPU, improve hashrate 2% on 16 series Nvidia GPU
• fix : ethash Fix performance degradation under win8 & win8.1 for Nvidia 10 series GPUs.
• fix : ethash Slightly reduce stale ratio.
• fix : A random crash bug fix, improve overall stability
• feature : Add detail datetime & cpu usage in summary log
• feature : ethash If DAG verification failed, display corresponding GPU name in red in summary.
• 优化 : octopus 降低20、30系N卡对功耗的需求，提高16系N卡算力2%
• 修复 : ethash 修复在win8和win8.1下10系N卡算力降低的问题
• 修复 : ethash 降低少许延迟
• 修复 : 修正一个可能导致小概率出现程序崩溃的bug，提高整体稳定性
• 功能 : 日志中算力统计部分增加 具体日期时间 以及 CPU使用率
• 功能 : ethash 当DAG校验有错误时，在summary中显示对应显卡为红色

v36.0

• fix : kawpow crash on some GPUs in versions 35.x
• fix : ethash performance degradation under win7 for Nvidia 10 series GPUs.
• delete algo : eaglesong , eaglesong_ethash , trb , trb_ethash , hns , hns_ethash , sipc , cuckaroo , cuckaroo_swap
• feature : smaller binary size
• 修复 : kawpow 35.x 版本在部分显卡上出现崩溃的问题
• 修复 : ethash win7下在10系列N卡上算力降低的问题
• 删除算法 : eaglesong , eaglesong_ethash , trb , trb_ethash , hns , hns_ethash , sipc , cuckaroo , cuckaroo_swap , tensority , tensority_ethash
• 功能 : 减小程序文件体积

Specifications NBMiner

• Windows and Linux support.
• Backup mining pool support.
• Support for SSL connections with mining pools.
• Development Fee (DevFee):
  • tensority(Pascal) 2%, tensority(Turing) 3%, tensority_ethash 3%
  • ethash etchash 1%
  • cuckaroo & cuckarood & cuckatoo & cuckatoo32 & cuckoo_ae & cuckaroo_swap 2%
  • progpow_sero 2%
  • sipc 2%
  • eaglesong 2%, eaglesong_ethash 3%
  • bfc 3%
  • hns 2%, hns_ethash 3%
  • trb 2%, trb_ethash 3%
  • kawpow 2%
  • beamv3 2%
  • octopus 3%

Web Monitor

Open http://api_host:port/ in your browser to use web monitor.

Request

System requirements

• NVIDIA Driver version: >= 377.
• GPU Specific Requirements:

Algorithm	Coin	Compute Capability	Memory (Win7 & Linux)	Memory (Win10)
tensority	BTM	6.1, 7.0, 7.5,8.0, 8.6	1GB	1GB
ethash	ETH	6.0, 6.1, 7.0, 7.5, 8.0,8.6	4GB	4GB
tensority_ethash	BTM+ETH	6.1, 7.0, 7.5, 8.6	4GB	4GB
cuckaroo(d)	GRIN29	6.0, 6.1, 7.0, 7.5, 8.0,8.6	5GB	6GB
cuckatoo	GRIN31	6.0, 6.1, 7.0, 7.5, 8.0,8.6	8GB	10GB
cuckatoo32	GRIN32	6.0, 6.1, 7.0, 7.5	8GB	10GB
cuckoo_ae	AE	6.0, 6.1, 7.0, 7.5, 8.0,8.6	5GB	6GB
cuckaroo_swap	SWAP	6.0, 6.1, 7.0, 7.5, 8.0,8.6	5GB	6GB
progpow_sero	SERO	6.0, 6.1, 7.0, 7.5, 8.0,8.6	2GB	2GB
sipc	SIPC	6.0, 6.1, 7.0, 7.5, 8.0,8.6	1GB	1GB
eaglesong	CKB	6.0, 6.1, 7.0, 7.5, 8.0,8.6	0.1GB	0.1GB
eaglesong_ethash	CKB+ETH	6.0, 6.1, 7.0, 7.5, 8.0,8.6	4GB	4GB
bfc	BFC	6.0, 6.1, 7.0, 7.5, 8.0,8.6	5GB	6GB
hns	HNS	6.0, 6.1, 7.0, 7.5, 8.0,8.6	0.1GB	0.1GB
hns_ethash	HNS+ETH	6.0, 6.1, 7.0, 7.5, 8.0,8.6	4GB	4GB
trb	TRB	6.0, 6.1, 7.0, 7.5, 8.0,8.6	0.1GB	0.1GB
trb_ethash	TRB+ETH	6.0, 6.1, 7.0, 7.5, 8.0,8.6	4GB	4GB
kawpow	RVN	6.0, 6.1, 7.0, 7.5, 8.0,8.6	3GB	3GB
beamv3	BEAM	6.0, 6.1, 7.0, 7.5	3GB	3GB
octopus	CFX	6.0, 6.1, 7.0, 7.5, 8.0,8.6	5GB	5GB

Configure NBMiner

For the fastest start it will be enough:

1. Download archive with the program
2. Unpack to any convenient place
3. Change wallet to your .bat file extension

The archive with the program contains ready-made examples for Grin, Ethereum + Bytom, a configuration file, as well as instructions in Russian.

OhGodAnETHlargementPill — tablet (patch) for video cards with GDDR5X memory for maximum hash rate.

open_web_monitor — html file to monitor the program via the web interface.

Quick Start Examples

1. Edit the “.bat” file
2. Change the username from the pool.
3. The program is launched by double clicking on the file with the .bat extension

1. nbminer The name of the program to run.
2. -a cuckarood – specify the mined coin algorithm.o stratum + tcp: //grin29.f2pool.com after building -o stratum + tcp: // specify the pool address.
3. : 13654 put a colon and specify the pool port
4. -u rgz – after the -u switch, specify the wallet address or login in the pool. The wallet can be opened at any convenient and secure exchange, or you can put an official wallet from a coin.
5. … by default – put a full stop and specify the name of the farm (any)
6. : x put a colon and provide a password (usually not required, so x)
7. -long-format – display program log
8. -log creates a log file named log_.txt.
9. -di 24 indicate the intensity of the program (for dual mining)

How to start NBMiner

You can run the program by double-clicking the file with the desired coin and with the extension .bat

1. ALGO: cuckarood — программа сообщает о выбранном нами алгоритме.
2. URL: stratum + tcp: //grin29.f2pool.com: 13654 — ПОЛЬЗОВАТЕЛЬ: rgz.default: x — логин, рабочий и пароль
3. ID 0: GeForce GTX 1080 Ti 11264 MВ, CC 61 — устройство и его температура.
4. Вход на grin29.f2pool.com:13654 — попытка установить соединение с пулом.
5. Login succeeded — connection successful
6. Новый iob от grin29.f2pool.com, ID: 71057520, DIFF: l.00 — пул отправил новое задание для видеокарт
7. # 1 Доля принята, 3614 мс. [DEVICE 0] — первый бал принят (часть работы). Нужно понимать, что за отправленные шары майнер получает вознаграждение.
8. 0: 4.15 h/s — hash rate

Also, information about the process of mining cryptocurrency can be viewed through the web interface. To do this, double-click the open_web_monitor file.

1. farm status – online
2. total program execution time
3. algorithm
4. user, employee and password
5. user, employee and password
6. graphics card statistics (hash rate, temperature, power consumption, fan speed, overclocking, core overload, memory overclocking, memory overload)
7. pool statistics (difficulty, ping, accepted and not accepted shares)

Источник

TBC Classic Mining Leveling Guide 1-375

This TBC Classic Mining leveling guide will show you the fastest way to level your Mining profession up from 1 to 375 in Burning Crusade Classic.

Mining serves three professions: Blacksmithing, Jewelcrafting, and Engineering, so it’s really good combined with any of these three. Check out my TBC Classic Blacksmithing leveling, Jewelcrafting leveling, or my Engineering leveling guide if you want to level any of these professions.

I recommend trying Zygor’s 1-70 Leveling Guide if you are still leveling your character or you just started a new alt. The guide will help you to reach level 70 a lot faster.

Table of contents:

Mining Trainers

You can learn Mining from any of these NPCs below. Just click on any of the links below to see the trainer’s exact location. You can also walk up to a guard in any city and ask where the Mining trainer is, and then the trainer will be marked with a red flag on your map.

Classic Trainers (1-300)

• Makaru in Orgrimmar.
• Brom Killian in Undercity.
• Brek Stonehoof in Thunder Bluff
• Johan Focht in Silverpine Forest.
• Krunn in Durotar.
• Pikkle in Tanaris.
• Belil in Silvermoon City.

• Geofram Bouldertoe in Ironforge.
• Gelman Stonehand in Stormwind City.
• Kurdram Stonehammer in Darkshore.
• Matt Johnson in Duskwood.
• Yarr Hammerstone in Dun Morogh.
• Pikkle in Tanaris.
• Muaat in The Exodar.

TBC Trainers (300-375)

You can learn the new TBC Mining skill in Hellfire Peninsula from Hurnak Grimmord (Alliance) at Honor Hold or Krugosh (Horde) at Thrallmar.

Smelting to 290

If you have enough gold, you can actually skip the first 290 skill points by simply smelting ores. But, if you need the ores for Jewelcrafting, or you simply prefer leveling Mining regularly, then scroll down a bit in the guide for farming routes.

Most smelting recipes are yellow or green, so I cannot list the exact number of ores that you will need. These are all approximate numbers below.

Skill

Notes

1-65 110-130x Smelt Copper until you reach 65. 65-75 70x Smelt Tin. This one will be grey after 75, but you will need these later. 75-105 70x Smelt Bronze. You might not reach 105, your skill will be somewhere between 100 and 110. 105-125 25-35x Smelt Silver until you reach 125. 125-155 50-65x Smelt Iron until you reach 155 155-175 20-25x Smelt Gold until you reach 175. 175-200 40x Smelt Mithril until you reach 200, then visit your trainer and learn Artisan Mining. 200-230 170-200x Smelt Mithril until you reach 230. 230-250 30-40x Smelt Truesilver until you reach 250. 250-290 140-180x Smelt Thorium until you reach 290. You will have to mine ores for the last 10 points, so scroll down to the Thorium Ore section.

Mining Leveling Routes

Don’t forget to buy a Mining Pick from the Mining Supply vendor near your trainer! You don’t have to equip it, but you have to have one in your inventory.

Make sure that you turn on the Find Minerals filter on your minimap!

1 — 65

Every starter zone is filled with Copper Ore. It doesn’t really matter which one you choose.

Night Elf players have to wait until they get to Darkshore before they can start leveling mining because Teldrassil doesn’t have any Copper Ore.

High level players should always enter the Venture Co. Mine because you will get around 8 Copper Veins from clearing both the mine and the small area after the mine at the side the mountain. (you can only access this area from the mine)

It can be a nightmare to find the exit the first time you are there so I included a small map. You won’t see this map in-game, because it’s from the Cataclysm expansion, but the layout is the same. Make sure to go to every corner of the cave!

Low level players should skip both caves.

Low level players should skip both caves.

The respawn rate is fast enough that you don’t have to loop around the whole zone, so you can use these two routes. If you have competition, you should move between the two routes while mining copper between them.

65 — 125

Visit your trainer and learn Journeyman Mining. (You need to level up Mining to at least 50)

Ores in these zones: Tin Ore, Copper Ore, Silver Ore

Low level players should skip the two caves marked with red circles.

Low level players should skip both caves and stick to the east side of Redridge.

The respawn rate should be fast enough that you don’t have to enter the cave marked on the map, but there is always two Tin Veins inside, so I think it’s worth to go inside with high level characters.

There is more Tin/Copper at the southern route, but you can use the northern route as an alternative if there are too many people farming in the zone. The difference between the two is not that big.

125 — 175

Visit your trainer and learn Expert Mining. (You need to level up Mining to at least 125)

Ores in these zones: Iron Ore, Tin Ore, Gold Ore

There are 4 caves marked with red circles on the map, make sure to go all the way to the end of each cave because you won’t see all the mining veins from the entrance.

Low level players should skip all 4 caves, and low level Alliance players should take a detour and go south of Hammerfall!

175 — 245

Don’t forget to visit your Mining trainer and learn Artisan Mining when you reach 225! (You need to level up Mining to at least 200)

Ores in these zones: Mithril Ore, Truesilver Ore

The red route should be skipped by lower level players because the area is filled with level 62 elites. Lower level players might also want to consider skipping the cave marked with a red circle on the map. (depends on your gear/class)

Players below level 60 should skip the 4 caves marked with red circles.

245 — 275

Ores in these zones: Mithril Ore, Truesilver Ore, Thorium Ore

There are 2-3 mineral veins in the two caves marked with the red circles on the map.

Lower level players should probably skip the cave to the south. It really depends on your level/gear/class.

There are two caves marked with a red circle on the map, both of them have a lot of mobs inside, so I would only recommend this farming place to level 60 players with good gear, or for Druids and Rogues with stealth.

It’s really hard to navigate inside the Garrison Armory mine, so I included a small map. Alliance players can’t mine inside the Garrison Armory!

There are usually 2 mining nodes insides the cave marked with a red circle. It’s worth going inside the cave because it’s not too large and there aren’t that many mobs inside, and if you are high level, you can pass some of them without aggro.

I recommend skipping the other two caves at Jaednar, especially Shadow Hold. (maybe if you have stealth it’s worth to go inside them)

275 — 300

Ores in these zones: Thorium Ore, Mithril Ore

Now you can mine Rich Thorium Veins too.

Almost the same as the previous Un’Goro route, but now it includes Rich Thorium Veins.

The red line is filled with level 57-58 elites, so if you have bad gear, you should probably just skip that part entirely unless you have stealth. With some practice, you can usually get through only aggroing a few of them.

All of these notes below are for players below level 70. If you are already at max level, just ignore these, you can farm the full map without problems.

1. The mobs in this cave are not that hard to kill, so it’s worth clearing for most classes. (depends on gear)
2. Most classes can enter at least the first part of the cave without pulling aggro. You can try going deeper depending on your gear.
3. There are a lot of elites patroling inside this gorge, but you can usually pass most of them without pulling aggro. Sometimes you have to kill 1 or 2.
4. This area is not recommended for most players because it’s hard to farm here without dying. Really depends on your class and your experience in avoiding mobs.

The two caves marked with red circles are filled with level 50 mobs, so lower level players might want to skip them. (depends on gear and level)

Burning Crusade Classic (300-375)

You can learn the new TBC Mining skill in Hellfire Peninsula from Hurnak Grimmord (Alliance) at Honor Hold or Krugosh (Horde) at Thrallmar.

300 — 325

I recommend Route 1 and Route 2 for level 70 players with flying mount. There is not much difference between the two routes, I got roughly the same number of Fel Iron on both routes.

If you don’t have a flying mount and are still leveling your character, then use Route 3.

It’s impossible to avoid pulling mobs in Hellfire Penninsula with a low level character, but this route avoids most areas with high density of mobs, so you can use it with lower level characters.

Don’t use this if you have a flying mount!

325 — 350

There will be a few Rich Adamantite nodes in Terokkar Forest that you can’t mine until you reach 350. But, they can only spawn in the areas accessible by flying mount, so this is not an issue for lower level players. (Skettis and the area above Shattrat City)

There are two caves marked with red circles on the map. You should go inside both of them and make sure that you go all the way to the end because sometimes you won’t see the Mining nodes from the entrance.

You will need a flying mount for this route, use route 3 if you don’t have one.

Alternative route for players without flying mount.

350 — 375

I recommend getting your last 25 skill points in Nagrand, Netherstorm or Shadowmoon Valley.

These routes below are made for players with flying mount. You can mine everything except Khorium tith 350 mining skill, so if you are not level 70 yet, I think it’s best to simply focus on leveling and getting your flying mount. I don’t think it worth focusing on getting to 375 if you are not 70 yet.

But, if you want to reach 375 with a lower-level character, I recommend just sticking to Terokkar Forest and Zangarmarsh. Both Adamantite Ore and Fel Iron ore give skill points all the way up to 375.

There are four caves marked with red circles on the map. You should go inside them and make sure that you go all the way to the end because sometimes you won’t see the Mining nodes from the entrance.

Just like in Nagrand, I marked the caves with red circles on the map. But, you should only go inside if you have stealth or if there is a lot of other people farming in the zone. These are much bigger than the Nagrand caves, and the mobs are a lot higher level. (maybe with good gear it’s worth clearing them)

There are two caves in the zone, but it’s not worth going inside them. It takes too long to get to the nodes, and you can farm more ores just doing laps in the zone instead.

Congratulations on reaching 375! Please send feedback about the guide if you think there are parts I could improve, or you found typos, errors, wrong material numbers!

Do you want to reach level 70 fast?

I recommend Zygor’s Leveling Guide. The guide is in a small window on your main screen in-game. All the detail that you need to complete the quest is included. You’ll never have to switch back to a website, or even the in-game main map to see where you have to go or what’s next. The guide is available for both Horde and Alliance.

I use Zygor’s guide for leveling and I highly recommend it.

Источник